When you need to have more scope available

OSMO LAB pr 20 is designed to produce pure water grade 3 from tap water. OSMO LAB pr 20 has 2 osmosis membranes and therefore can guarantee a high production work with despite the pressure of 'waterworks. The size of the cartridge pre-filter and resin allows excellent autonomy before replacement.

Careful use of space

In modern laboratories the spaces available are increasingly reduced, so we thought OSMO LAB pr 20 so that it can be easily accommodated even in places not very accessible (inside furniture, wall hanging, local secondary). The user will have available on the bench working on tank pressure, with a reserve of 9-10 liters of water and on which there are 2 dispensers for the differential sampling of purified or pure grade 3. You can also optionally connect 2 or more storage tanks also distant among them,  OSMO LAB pr 20  manage them automatically.

Water of good quality with low production costs

OSMO LAB pr 20 is able to produce demineralised water with purity usually above the minimum standards required for grade 3, however, keeping production costs low because OSMO LAB pr 20 is directly fed with water of wateworkr, without normally pre-treatment details; also uses purified water for laboratory assistant is produced only by a method for reverse osmosis (without material consumption for demineralization) and finally pure water GRADE 3 is obtained with resins of high purity, and these volumes to allow high-performance cycles of demineralization and higher production of 1000 liters per charge *. (*) The length of the cartridges of resin depends on the quality of feed water.

2 TYPES OF WATER STILL AVAILABLE:

• purified water for technical uses
• pure water GRADE 3 (conf. ISO 3696)

4 PURIFICATION STAGES

• sediment microfilter
• reverse osmosis
• mixed bed resins
• anti bacteria micro filter 47 mm (optional)

CONTINUOS MONITOR OF WATER PRODUCED

• El. conducibility purified water at 5 led

 print OSMO LAB pr 20