QUALITY STANDARD

ISO 3696                                               
ASTM                                                    
NCCLS (con filtro antibatterico finale)          
EP/USP     (con filtro antibatterico finale)

EL. SPEC. RESISTIVITY 25°C                        

 

 

gradE 2
Type II
Type II
conform

10-18,2 MOhm.cm

 


                         

 

 

A complete system of water purification 
indispensable in any laboratory
Thanks to the possibility of providing two types of water, OSMO LAB UPW 2 is an increasingly indispensable tool for most needs in the laboratory analysis of small and medium size.

 

 

Careful use of space
In modern laboratories the spaces available are increasingly reduced, so OSMO LAB UPW 2 can be easily accommodated even in places not very accessible (inside furniture, wall hanging, local hardware). The user will have available on the bench working on tank pressure, with a reserve of 9-10 liters of water and on which there are 2 dispensers for the differential sampling of purified or pure grade II. E 'can also optionally connect 2 or more storage tanks also distant with each other, OSMO LAB 2 UPW manage them automatically.

Water of high quality with low production costs
OSMO UPW LAB 2 is able to produce demineralised water with a purity beyond the minimum standards required for grade II, however, keeping production costs low because OSMO LAB UPW 2 is directly feed with water from the aqueduct without under special pre-treatment and that the purified water for uses ancillary laboratory is produced only by a method for reverse osmosis (without material consumption for demineralization) and finally pure water GRADE II is obtained with 2 different types of resins with a high degree of purity enabling high performance of demineralisation from beginning to end of their cycle.

 

2 TYPES OF WATER STILL AVAILABLE:
purified water for technical uses
pure water GRADE II (conf. ISO 3696)


4 STAGES OF PURIFICATION
sediment microfiter
reverse osmosis
pure resin 1 and ultra pure resin 2
anti bacteria microfilter 47 mm (opzional)

2 CONTINUOUS MONITOR OF WATER PRODUCED
indicator of the conductivity “purified water” to 5 LEDs
digital resistivity meter “water GRADE II”

feed water requirements

 

- TDS max 
- HD max 
- Ferro max 
- Manganese max 
- chlor max 
- Bacteria tot. max 
- SDI 

- pressure

- temperature  
                     

 

1000 ppm
35 °F
100 ppb
5 ppb
0,1 ppm
5 UFC/ml
< 5

min 2,0 bar
max 4,5 bar

min 5 °C
max 35 °C

 

TECHNICAL FEATURES

APPLICATIONS


- HOURLY PRODUCTION

- DAILY PRODUCTION 

- min. feed pressure 
- max feed pressure 
- range of temp. to be treated 

- ALIMENTAZIONE ELETTRICA 

- feed water temperature 
 

- max operative pressure 


8-10

lt fino a 100 demi
fino a 200 purificata
bar 1,5
bar 4,0
°C 5-35

V 220 ac / 24 ac

IN pipe PE 6/4
OUT pipe PE 6/4
DRAIN pipe PE 6/4
bar 6,0

   
  • HPLC chromatography

  • Spectro-photometric analysis under atomic absorption

  • Reagents preparation/dilution

  • Colorimetric and qualitative analysis

  • Feeding of ultra-pure water systems, surge tanks, etc.

  • Feeding of glass works washers

  • Feeding of steam generators


 

 

 

 

PRINT pag of catalogue pag.10-11     [DEMINERALIZERS CATALOGUE ]     [menu]     [home]     [contact]