UPW REFINER     

Apparatus for the production of ultra-pure water - GRADE 1       
 

 

 
 

QUALITY STANDARD

ISO 3696
ASTM
NCCLS
EP/USP

EL. SPEC. RESISTIVITY at 25°C  

 grade 1
Type I
Type I
conform

18,2 MOhm.cm

 
 

A fully automated apparatus to produce ultra pure water of grade 1
UPW refiner is a water purification system for the production of ultra pure water up to an electrical resistivity spec.di 18.2 MOHM.cm, suitable for analytical applications of high precision.

 
Everything under control
 UPW refiner has a digital resistivimeter to monitor continuously the quality of the water produced, a PLC controller with a diplay for eil management control of operational functions and an LED panel that shows the states of the machine and any alarm .

 
Production of ultra pure water of grade 1 through 3 different types of purification
UPW refiner is powered by a source of demineralized water as OSMO UPW LAB 2, LAB OSMO 2 or any demineralizers of line gamma 3 capable of delivering water of at least grade 3 (pursuant to ISO 3696). 
UPW refiner is able to produce fully purified water from the saline (Spec electrical resistivity at 25 ° C - 18.2 MOhm.cm) and TOC levels are very low (<10 ppb), thanks to an automatically controlled recirculation and 3 different types of purification:

  • Ion exchange resins type 1 and 2
  • Photo oxidation with UV rays 
  • Microfiltration 0,2 micron antibacteria

 
 

Simplicity of operation and store of water always available
UPW refiner is very easy to use, since fully automatic in its duties and has a single button to levy placed on the front panel and provides a reservoir of water of 5 liters, which is restored after each use by the operator..

 
Dimensions

length                              
Width                    
Height                    

Dry Weight   

 

  

cm 44
cm 46
cm 52

kg 26

 

 OPTIONALS

 

Flask sampling.

The flask sampling for UPW refiner is designed to take samples which must not be exposed to the air: a system of ball valves and tubes leak, allow to completely fill the flask, and after the operation the sampling, isolate the sample from the outside until use. 
The operations of connection and release are in very practical due to the use of quick connectors.

Pressure storage tank Lt 19

If you get there food with Osmo Lab UPW or LAB OSMO 2 in order to reduce the load times and therefore increase the efficiency of purification, you should insert the feeding tube of the tank lt 19 in pressure to be provided as an accessory (code 0000244). 

 

 

PRINT pag of catalogue pag.6-7     [DEMINERALIZERS CATALOGUE ]     [menu]     [home]     [contact]